Quote:
Originally Posted by DoubleK
Echogear makes spacers with longer bolts for their mounts that accommodate this.
I did wonder how many people used the longer bolts for a flush mount application and destroyed their panels. . .
|
I forgot about considering spacers. It always seemed a little sketchy using a piece of plastic to get an extra 1-3 cm. Monitors, whatever. But tvs with those weights.. Not totally comfortable.
Because the woofer just out 1.5-2cm and the curve adds another 0.5-1cm, any articulated mount with something in the middle might be blocked. I was fixated on fixed angle mounts where the bars on each side avoided this... But I wanted an articulated mount.
I'll pick up a kit and check to see if I can get it to work. It'll be close. I hope spacers aren't needed on both top and bottom for the subwoofer to clear. I might feel more comfortable getting an angle mount instead of using so many spacers. Thanks for the suggestion.
Echogear has a mounting hardware set, but the M4 screws only had 12/35mm lengths. I picked up a different highly rated set that has 12/20/35mm lengths for M4 screws. For whatever reason, the echogear set has 16/20/25/30/35 for M8, so it'll be great for someone needing M8, which unfortunately isn't me.
