06-04-2020, 06:03 PM
|
#2761
|
Franchise Player
|
Stop by Glenmore Boats and grab a cleat like this:
You can hang a small bag underneath, and just quickly coil and toss it in for neatness.
|
|
|
The Following User Says Thank You to Fuzz For This Useful Post:
|
|
06-04-2020, 06:49 PM
|
#2762
|
Franchise Player
|
Quote:
Originally Posted by Fuzz
Stop by Glenmore Boats and grab a cleat like this:
You can hang a small bag underneath, and just quickly coil and toss it in for neatness.
|
Ya, not a bad idea, might look into those ideas.
Quote:
Originally Posted by PaperBagger'14
How much room below those hooks do you have to the base of the 4x4? You could install hooks below to wrap the extra cord on. The other option would be similar to a patio umbrella, a reel and crank system.
|
Its a 6x6 on the second story....so lots of room. But crank wouldnt work due to the fact it'd be on the back side and hard to get at. But not a bad idea using the hooks to wrap and then a cleat/thinger for the locking mech
|
|
|
06-04-2020, 07:19 PM
|
#2763
|
Franchise Player
|
Spoilered for size.
Had a leak in the basement and had someone come out to help, weirdly enough there is some loose fill in the walls.
Looks like cellulose to me but does it look like asbestos to anyone?
|
|
|
06-04-2020, 07:25 PM
|
#2764
|
Crash and Bang Winger
|
Quote:
Originally Posted by Bonded
Spoilered for size.
Had a leak in the basement and had someone come out to help, weirdly enough there is some loose fill in the walls.
Looks like cellulose to me but does it look like asbestos to anyone?
|
Just looks like Rockwool to me... Don't think you can diagnose asbestos without a microscope either way
|
|
|
06-04-2020, 08:26 PM
|
#2765
|
Franchise Player
Join Date: Jun 2005
Location: Hell
|
Quote:
Originally Posted by Bonded
Spoilered for size.
Had a leak in the basement and had someone come out to help, weirdly enough there is some loose fill in the walls.
Looks like cellulose to me but does it look like asbestos to anyone?
|
Definitely looks like it's just cellulose
__________________
|
|
|
06-05-2020, 11:39 AM
|
#2766
|
First Line Centre
|
Looks like standard cellulose, pretty safe but can only be sure with a test.
The main issue with asbestos in house insulation comes from Vermiculite which was sold as Zonolite, a dump in add on for attics.
I have opened walls and had this stuff come out but it was poured on top of existing wood chip insulation to fill gaps from sag.
https://indoorscience.com/blog/vermi...-and-asbestos/
|
|
|
06-05-2020, 11:55 PM
|
#2767
|
Franchise Player
Join Date: Feb 2011
Location: Somewhere down the crazy river.
|
Quote:
Originally Posted by Bonded
Spoilered for size.
Had a leak in the basement and had someone come out to help, weirdly enough there is some loose fill in the walls.
Looks like cellulose to me but does it look like asbestos to anyone?
|
It just looks nasty. We have that in our attic and the first time I saw it I was startled. I thought we had some kind of mouse infestation that tore up all the pink batting.
|
|
|
06-11-2020, 09:23 AM
|
#2768
|
Franchise Player
Join Date: Oct 2001
Location: NYYC
|
nm, found one.
Last edited by Table 5; 06-11-2020 at 10:47 AM.
|
|
|
06-11-2020, 12:49 PM
|
#2769
|
Franchise Player
|
Has any donated used building materials to someplace like ReStore before? Anything I should be aware of?
I did a major refresh on my home recently and I have nearly 20 honey oak hollow core room doors to donate, 5 bi-fold closet doors and brass door hardware for nearly 30 doors. So I'm interested in the pickup option vs dropping them off myself, but unsure if they're doing that due to covid (seems like they are on their website, but I'll call later to confirm). The form seems relatively straight forward. I'll have to take a ton of pics and sort though a few boxes worth of stuff though.
There's a few other things they don't take like brass towel rack, toilet paper holder and light fittings + tons of fluorescent bulbs from an LED swap I'd love to get rid of, but I'm assuming they won't help with that, so it might have to go to Kijiji vagrants for that.
|
|
|
06-11-2020, 01:53 PM
|
#2770
|
Franchise Player
|
I dropped off stuff here a few months ago:
https://good-4u.com/
He seemed to take anything. Not sure about pickup, but for drop off I just hauled it in and left it at the desk.
|
|
|
06-12-2020, 11:35 AM
|
#2771
|
Franchise Player
|
Quote:
Originally Posted by Fuzz
I dropped off stuff here a few months ago:
https://good-4u.com/
He seemed to take anything. Not sure about pickup, but for drop off I just hauled it in and left it at the desk.
|
Yeah, I contacted those guys at the end of February, sent pics, had several phone calls with them and discussed pick up and communication just completely broke down with them near the end of February. Communication was weird and confusing in the first place as well which wasn't idea. No replies even with a few follow ups. Then Covid happened in March and I just decided to put it on the side burner.
I have enough stuff that it would probably take at least 2-3 truck beds worth of drop offs to get rid of. I don't own a truck and I'm not renting a thing to tow that stuff to their location, so it's far preferable to ask for pick up.
|
|
|
06-15-2020, 10:48 PM
|
#2772
|
#1 Goaltender
Join Date: Apr 2009
Location: Back in Calgary!!
|
Any ideas on a register that has zero airflow?
I know very little about HVAC, but it seems like this register is disconnected somewhere. The problem is its in the baby room and with a month or so of data collection, its the hottest room in the house.
Its your typical 2 story suburb. The side of the house is hot already because it faces east and gets pounded by the sun all morning. We have A/C but its not particularly effective on the top floor.
Basement is unfinished so I have access to the base of the HVAC system. What I'm wondering is if its possible to replace that run of duct? Are those things secured in a way that I could disconnect it at the register and then just pull it out through basement.
I really don't want to start cutting into walls or ceilings. Part of me wonders if the second register would even make much of a difference.
It just makes me wonder why one single register has zero airflow and if it's disconnected somewhere and if that disconnect could actually be related to subpar cooling/heating on the entire second floor.
Sent from my SM-G973W using Tapatalk
|
|
|
06-15-2020, 11:20 PM
|
#2773
|
First Line Centre
|
Quote:
Originally Posted by sa226
Any ideas on a register that has zero airflow?
I know very little about HVAC, but it seems like this register is disconnected somewhere. The problem is its in the baby room and with a month or so of data collection, its the hottest room in the house.
Its your typical 2 story suburb. The side of the house is hot already because it faces east and gets pounded by the sun all morning. We have A/C but its not particularly effective on the top floor.
Basement is unfinished so I have access to the base of the HVAC system. What I'm wondering is if its possible to replace that run of duct? Are those things secured in a way that I could disconnect it at the register and then just pull it out through basement.
I really don't want to start cutting into walls or ceilings. Part of me wonders if the second register would even make much of a difference.
It just makes me wonder why one single register has zero airflow and if it's disconnected somewhere and if that disconnect could actually be related to subpar cooling/heating on the entire second floor.
Sent from my SM-G973W using Tapatalk
|
While doing our basement a few years back I went around to all the exposed ductwork to make sure I sealed the crappy connections and to check they were tight. Lo and behold I had one fall apart in my hands... thankfully it was easy to access to add some screws instead of crappy pressure-fit. Your ductwork might have fallen apart too... best you could do perhaps is to try to track down where you have a hot-spot on a wall if your furnace is blasting. perhaps Google could provide some guidance how to do that.
|
|
|
06-16-2020, 01:04 AM
|
#2774
|
Franchise Player
Join Date: Aug 2012
Location: Seattle, WA
|
Quote:
Originally Posted by sa226
Any ideas on a register that has zero airflow?
|
I had this in my master bedroom in my old house in Silverado. One of the 90 degree corners fell apart and I was heating/cooling my floor joists. It was diagnosed by using a snake/inspection camera.
Had to cut the floor to repair it, but it was well worth the effort. I'm not the handiest person alive but was able to tackle it with some help from my old man.
Depending on when your house was built, your subfloor might be attached with construction adhesive which is a bitch to pull up. You will likely need to replace the subfloor you pull up so make sure you have enough on hand to patch it.
__________________
It's only game. Why you heff to be mad?
Last edited by DoubleK; 06-16-2020 at 01:06 AM.
|
|
|
06-17-2020, 09:37 AM
|
#2775
|
Franchise Player
|
Kinda thinking out loud...
If you were to build a wood fence, wouldn't it be better to to put heavy duty galvanized steel posts (like for a chainlink fence) into concrete, then clad the posts in like 2x6 cedar or something?
I think when you put PT or Cedar wood directly into concrete, the expansion and contraction of the wood over a period of a few short years would crack the concrete making it useless. Especially if you are using 6x6 posts.
|
|
|
06-17-2020, 09:44 AM
|
#2776
|
Franchise Player
|
Quote:
Originally Posted by CroFlames
Kinda thinking out loud...
If you were to build a wood fence, wouldn't it be better to to put heavy duty galvanized steel posts (like for a chainlink fence) into concrete, then clad the posts in like 2x6 cedar or something?
I think when you put PT or Cedar wood directly into concrete, the expansion and contraction of the wood over a period of a few short years would crack the concrete making it useless. Especially if you are using 6x6 posts.
|
I think your issue would be attaching the rest of the fence to the cladded posts. The cladding would have to be fastened to the post very well so I don't think a chain link post would work. You'd need a fairly substantial, at least 4x4 square steel post so that you could attach (bolt?) the cladding to it so that it could carry the load of the fence that attaches to it. That much steel is, or was (not sure what steel price are) way too expensive.
But I'm sure there is something that you could use, like whatever they use for the plastic fencing you see once in a while. There's something better out there for sure. Just look at alternative fencing and see if you could adapt it to use with your traditional wood fence.
|
|
|
The Following User Says Thank You to OMG!WTF! For This Useful Post:
|
|
06-17-2020, 09:51 AM
|
#2777
|
#1 Goaltender
Join Date: Apr 2009
Location: Back in Calgary!!
|
Also thinking out loud, but I'm not sure if the expansion and contraction is strong enough to crack concrete. Could be wrong. The issue long term with wood in concrete is premature rot. Concrete retains moisture so its in constant contact with no chance of drying out. A gravel pack is usually the best. I think you're asking for other issues if you try and clad a steel post with wood.
|
|
|
06-17-2020, 10:02 AM
|
#2778
|
Franchise Player
|
Interesting points. I don't mind doing maintenance on the fence, and I love the wood look.
What I don't like is having to replace posts.
Fencetrac has some attractive looking fences that integrate the steel posts into the overall look of the fence that I never thought of before.
|
|
|
06-17-2020, 10:19 AM
|
#2779
|
Franchise Player
|
__________________
Quote:
Originally Posted by calgaryblood
Looks like you'll need one long before I will. May I suggest deflection king?
|
|
|
|
06-17-2020, 10:34 AM
|
#2780
|
Franchise Player
|
Quote:
Originally Posted by Hockeyguy15
|
I think those might be too floppy. But I don't know that for sure. They're commonly used for decks so no risk of toppling sideways.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 06:49 AM.
|
|