12-11-2013, 10:01 AM
|
#41
|
Franchise Player
Join Date: Apr 2003
Location: Not sure
|
Quote:
Originally Posted by Old Yeller
Don't do it man, you'll take years off your life through drywall dust, frustration, and your non happy wife.
As someone who did an entire basement reno and thought "pfff how hard can taping/mudding be?" ... the answer is:
"VERY ####ING HARD"
I joke around that the whole reason I sold that house and moved was because of the drywall job I did in the basement... secretly I'm only half kidding.
|
I hear ya brother. My first mudding experience was in my basement too and I hated the way it turned out. I gradually got better at it as I've now done two washrooms as well but the only reason I think they turned out better is becuase they were so much smaller and I didn't overwhelm myself.
And oh that drywall dust.......it dries you skin into tanned cowhide. Sanding the ceiling was certainly a joy, my favourite part in fact. Sand till you cant see anymore, whipe off goggles, get dust in your eyes despite wearing goggles, go have a shower afterwards and basically cry drywall dust out of your eyes. Next time I'm just going to do a suspended ceiling.
|
|
|
The Following User Says Thank You to GoinAllTheWay For This Useful Post:
|
|
12-11-2013, 10:13 AM
|
#42
|
#1 Goaltender
|
I've made it through our kitchen reno with all my tools but I've lost a good chunk of screwdriver bits.
|
|
|
12-11-2013, 10:27 AM
|
#43
|
Scoring Winger
Join Date: Apr 2011
Location: In a van down by the river
|
I must be the only one here who doesn't mind drywalling/mudding. It's not rocket surgery, the biggest difference between myself and the pro's is probably twice or three times the amount of sanding. That said, I still hire out when possible as the whole time vs. money ratio comes into play.
|
|
|
12-11-2013, 10:40 AM
|
#44
|
Franchise Player
|
The biggest difference between myself and the pros is the fact that I know where the flaws are in my mudding jobs, and am blissfully ignorant when someone else does it.
I bet if date rape drugged myself and did some mudding, it would be an awesome job, because in the morning I wouldn't know where all the minor mistakes that a 3rd party would never notice or care about, but somehow are unacceptable when I do it myself un-roofied.
|
|
|
12-11-2013, 10:50 AM
|
#45
|
Franchise Player
Join Date: Apr 2003
Location: Not sure
|
/\/\/\ lol
I'm sure I'm not the only one that applies a ton of the stuff only to wind up sanding 95% off.
I think the one thing that really improved the finish of my mudding jobs was buying one of those big mud stiring metal sticks. Jam that thing in their mounted to a drill and blend until "creamy". It goes on much smoother and thinner and that equals less sanding!
I also experimented with that adhesive tape that looks like it's made out of thread arranged in a grid patter. MUCH prefer the results of normal paper.
Last edited by GoinAllTheWay; 12-11-2013 at 10:54 AM.
|
|
|
12-11-2013, 12:30 PM
|
#46
|
First Line Centre
|
Quote:
Originally Posted by Ducay
The biggest difference between myself and the pros is the fact that I know where the flaws are in my mudding jobs, and am blissfully ignorant when someone else does it.
I bet if date rape drugged myself and did some mudding, it would be an awesome job, because in the morning I wouldn't know where all the minor mistakes that a 3rd party would never notice or care about, but somehow are unacceptable when I do it myself un-roofied.
|
Then you wake up three days later with a trowel stuck in your ass!!
Wait, we can say Ass? Ass-some!!
|
|
|
The Following 2 Users Say Thank You to Titan For This Useful Post:
|
|
02-14-2014, 12:53 PM
|
#47
|
Powerplay Quarterback
|
anybody know of associated costs involved with installing a range hood and ducting thru the roof?
|
|
|
02-14-2014, 01:21 PM
|
#48
|
Franchise Player
Join Date: Aug 2007
Location: Vancouver
|
...that is all.
__________________
|
|
|
The Following User Says Thank You to Coach For This Useful Post:
|
|
02-14-2014, 01:48 PM
|
#49
|
Retired
|
I'm not handy in the slightest, but I've decided that this summer I am going to redo the laminate floors in my main room (roughly 450sqft).
The stuff I have right now was from the previous owner, and was quite clearly the .49 cents per sqft crap. People walk across it and it leaves impressions.
What AC rating should I be looking for? Should I get AC4 stuff or should I splurge for AC5? I have 2 pets, so it needs to be tougher.
I know the technology is pretty much snap on for the most part. What problems am I going to run into if I do it myself? I don't have a ton of curves in my place aside from a semi circular bar style table to the kitchen, so apart from that half moon, I have a couple door frames and that is about it for special cuts.
My moisture barrier and lower level is fine, so I don't think I want to replace it. I am just planning to rip off the current 12mm stuff and put new stuff on top.
|
|
|
02-14-2014, 02:59 PM
|
#50
|
Franchise Player
Join Date: Dec 2006
Location: Calgary, Alberta
|
I'm wondering about basement development, and specifically about those load-bearing poles. What can you do with them? I assume that moving them is not good because it will cost a fair amount to do properly, but at the same time I don't particularly want a wall right where one is located. Any ideas?
|
|
|
02-14-2014, 03:09 PM
|
#51
|
Monster Storm
Join Date: Apr 2007
Location: Calgary
|
You could build out a box around it and wrap it in stone. Make it a pillar. Or just take it out. (Take pictures if you decide to take it out)
__________________
Shameless self promotion
|
|
|
The Following 2 Users Say Thank You to surferguy For This Useful Post:
|
|
02-14-2014, 03:10 PM
|
#52
|
Franchise Player
Join Date: Apr 2004
Location: 127.0.0.1
|
Quote:
Originally Posted by Slava
I'm wondering about basement development, and specifically about those load-bearing poles. What can you do with them? I assume that moving them is not good because it will cost a fair amount to do properly, but at the same time I don't particularly want a wall right where one is located. Any ideas?
|
I don't think you can move them, unless you put in a steel beam.
__________________
Pass the bacon.
|
|
|
The Following User Says Thank You to DuffMan For This Useful Post:
|
|
02-14-2014, 03:17 PM
|
#53
|
Franchise Player
Join Date: Dec 2006
Location: Calgary, Alberta
|
Quote:
Originally Posted by surferguy
You could build out a box around it and wrap it in stone. Make it a pillar. Or just take it out. (Take pictures if you decide to take it out)
|
If I personally decided to take it out I have a feeling you would see the pictures on the cover of the newspaper!
|
|
|
The Following User Says Thank You to Slava For This Useful Post:
|
|
02-14-2014, 03:27 PM
|
#54
|
Franchise Player
|
Quote:
Originally Posted by stazzy33
Anyone know what ever happened to Jonathon Taylor Thomas?
|
out of thanks, but the first response to the this thread was frigin hilarious
|
|
|
02-14-2014, 03:36 PM
|
#55
|
The new goggles also do nothing.
Join Date: Oct 2001
Location: Calgary
|
Need to replace the hardwood flooring in a condo that got some water damage, it's a concrete floor (or a thin layer of concrete anyway) underneath with in-floor hot water heating, so I assume it's an engineered floor that I'm looking for?
First thought is porcelain tile in the kitchen / entry and stay with wood everywhere else.
Any alternatives out there that I should consider? It's a high end condo so I'll probably avoid laminate. Bamboo seems kind of nice but not sure if it's as durable, the stuff that's in there now still looks like new even though it is 14 years old.
__________________
Uncertainty is an uncomfortable position.
But certainty is an absurd one.
|
|
|
02-14-2014, 05:37 PM
|
#56
|
Backup Goalie
Join Date: Aug 2008
Location: Calgary
Exp:
|
Quote:
Originally Posted by CaramonLS
I'm not handy in the slightest, but I've decided that this summer I am going to redo the laminate floors in my main room (roughly 450sqft).
The stuff I have right now was from the previous owner, and was quite clearly the .49 cents per sqft crap. People walk across it and it leaves impressions.
What AC rating should I be looking for? Should I get AC4 stuff or should I splurge for AC5? I have 2 pets, so it needs to be tougher.
I know the technology is pretty much snap on for the most part. What problems am I going to run into if I do it myself? I don't have a ton of curves in my place aside from a semi circular bar style table to the kitchen, so apart from that half moon, I have a couple door frames and that is about it for special cuts.
My moisture barrier and lower level is fine, so I don't think I want to replace it. I am just planning to rip off the current 12mm stuff and put new stuff on top.
|
AC 4 rating should be more than fine, what kind of pets do you have? You should definitely cut the door jambs to slide the material underneath if it isn't done already. Is the curved area going to leave a gap or is there a trim covering it?
|
|
|
02-14-2014, 05:47 PM
|
#57
|
Backup Goalie
Join Date: Aug 2008
Location: Calgary
Exp:
|
Quote:
Originally Posted by photon
Need to replace the hardwood flooring in a condo that got some water damage, it's a concrete floor (or a thin layer of concrete anyway) underneath with in-floor hot water heating, so I assume it's an engineered floor that I'm looking for?
First thought is porcelain tile in the kitchen / entry and stay with wood everywhere else.
Any alternatives out there that I should consider? It's a high end condo so I'll probably avoid laminate. Bamboo seems kind of nice but not sure if it's as durable, the stuff that's in there now still looks like new even though it is 14 years old.
|
I would recommend tile in the kitchen area and wood everywhere else like you said. As for the hardwood material bamboo is nice but doesn't fare too well in Calgary's climate I find, it's just too dry here. If you are really thinking of going with bamboo, make its not the cheap stuff and make sure you can control the humidity in your condo to the materials specs. As for other material you can go with engineered hardwood either click together or glue together. You can also do a 3/4" solid hardwood as long as it it glued down to the subfloor. Also, does your condo board have specific rules on underlay or soundproofing?
|
|
|
02-14-2014, 07:40 PM
|
#58
|
The new goggles also do nothing.
Join Date: Oct 2001
Location: Calgary
|
I think the current hardwood must be glued down to a subfloor, but I didn't see any kind of soundproofing material.. if it is hopefully the condo corp will pay for replacing that if it's part of the bylaws (then it wouldn't be considered a betterment like the hardwood itself is, the board is only paying for carpet there I have to pay the difference up to whatever I put in there).
Wasn't really stuck with bamboo, just had seen some recently and was wondering if there was something that was the "new standard" for nice stuff. Actually maybe I should go see some condo show units to see what the current styles are.
I really liked my wood
__________________
Uncertainty is an uncomfortable position.
But certainty is an absurd one.
|
|
|
02-14-2014, 07:40 PM
|
#59
|
Retired
|
Quote:
Originally Posted by flaming_potato
AC 4 rating should be more than fine, what kind of pets do you have? You should definitely cut the door jambs to slide the material underneath if it isn't done already. Is the curved area going to leave a gap or is there a trim covering it?
|
Husky and a cat. When the husky gets excited, it is like a live roadrunner cartoon on the floor.
The door jambs aren't cut, they were worked around. 0.5cm thick trim on the kitchen edge, so it won't be much cover.
|
|
|
02-14-2014, 07:54 PM
|
#60
|
First Line Centre
|
Quote:
Originally Posted by Slava
I'm wondering about basement development, and specifically about those load-bearing poles. What can you do with them? I assume that moving them is not good because it will cost a fair amount to do properly, but at the same time I don't particularly want a wall right where one is located. Any ideas?
|
I made a box around mine to take it from an annoying pole to a slightly larger and more annoying drywalled in pole. Then I used it as an excuse to put a conduit across the ceiling at the same place for various media wiring. Thinking back, that was really a waste of time when you figure that most basement ceilings are going to be at least partially drop ceiling.
Anyway I don't know how expensive actually moving one is, but you should just chrome the hell out of it.
Embrace the pole.
|
|
|
The Following User Says Thank You to Old Yeller For This Useful Post:
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 09:49 PM.
|
|