03-30-2014, 12:50 PM
|
#1
|
Self Imposed Exile
Join Date: Jul 2008
Location: Calgary
|
Fixing leaky sink pipe
Good day,
The wife was using CLR on a faucet and accidentally let some of it go down the sink.
Now the pipes leak, I didn't realize CLR could have this affect, but they didn't leak before and now they do.
I am the farthest thing from a plumber, is there a sealant paste of some sort I can just place over the leaky areas? It isn't gushing water or anything.
If so, any recommended products?
Thanks as always.
|
|
|
03-30-2014, 12:56 PM
|
#2
|
Franchise Player
|
Where is it leaking from? If it's just at the links you can most likely just pick up some plumbers tape and reseal the links
|
|
|
The Following User Says Thank You to iggy_oi For This Useful Post:
|
|
03-30-2014, 01:09 PM
|
#3
|
Self Imposed Exile
Join Date: Jul 2008
Location: Calgary
|
i just checked it out again, I actually don't think it is coming from the pipe, I was mislead by the water running down the side.
It appears it is coming from the cold water inlet to the faucet, but I can't see where.
I guess I have to figure out exactly what is happening before anyone can recommend a solution, but thank you iggy_oi
|
|
|
03-30-2014, 02:00 PM
|
#4
|
First Line Centre
Join Date: Feb 2010
Location: Calgary
|
Bite the bullet and call a plumber. I'm in the same boat as you, I can barely operate basic tools, so when it comes to plumbing things I just pull out the credit card.
|
|
|
The Following User Says Thank You to Regular_John For This Useful Post:
|
|
03-30-2014, 03:07 PM
|
#5
|
Powerplay Quarterback
Join Date: Dec 2009
Location: SE Calgary
|
Is it a braided steel line to the faucet? If so grab a wrench and maybe tighten the nut half a turn and see if that fixes it.
|
|
|
The Following User Says Thank You to oilyfan For This Useful Post:
|
|
03-30-2014, 09:42 PM
|
#6
|
Self Imposed Exile
Join Date: Jul 2008
Location: Calgary
|
|
|
|
The Following User Says Thank You to Kavvy For This Useful Post:
|
|
03-30-2014, 09:44 PM
|
#7
|
Lifetime Suspension
|
Quote:
Originally Posted by jaydorn
Bite the bullet and call a plumber. I'm in the same boat as you, I can barely operate basic tools, so when it comes to plumbing things I just pull out the credit card.
|
Yeah, I consider myself pretty handy but I try to stay away from plumbing and electrical. Electrical is too dangerous and plumbing can be too messy.
|
|
|
03-31-2014, 01:38 PM
|
#8
|
Franchise Player
Join Date: Sep 2008
Location: Calgary
|
I had to replace the sprayer hose under my kitchen sink a few weeks ago. I was able to get it done for about $20 in parts, but because of some awkward angles under the sink, it took hours. And my body hurt for a few days afterwards from laying there all twisted and pathetic.
Of course, a plumber would have come in and done it in 20 minutes and I would have lamented the cost and thought to myself "I could have done that!"
|
|
|
03-31-2014, 02:22 PM
|
#9
|
Franchise Player
Join Date: Apr 2003
Location: Not sure
|
Quote:
Originally Posted by Jimmy Stang
I had to replace the sprayer hose under my kitchen sink a few weeks ago. I was able to get it done for about $20 in parts, but because of some awkward angles under the sink, it took hours. And my body hurt for a few days afterwards from laying there all twisted and pathetic.
Of course, a plumber would have come in and done it in 20 minutes and I would have lamented the cost and thought to myself "I could have done that!"
|
I think most people would be surprised with what they can do themselves. Leaky pipes, faucet replacement, new toilet/faucet/sink really are quite simple to do.
Escpecially with PEX being used today. No soldering, pipe cutters/sanding. Just snip and clamp into place. It's almost dissapointing how easy it is.
|
|
|
The Following 2 Users Say Thank You to GoinAllTheWay For This Useful Post:
|
|
03-31-2014, 04:08 PM
|
#10
|
Scoring Winger
|
Quote:
Originally Posted by GoinAllTheWay
I think most people would be surprised with what they can do themselves. Leaky pipes, faucet replacement, new toilet/faucet/sink really are quite simple to do.
Escpecially with PEX being used today. No soldering, pipe cutters/sanding. Just snip and clamp into place. It's almost dissapointing how easy it is.
|
I totally agree, I was afraid to do maintenance before but with the stuff you can find on youtube there is always a tutorial out there showing you step by step what to do. I replaced all they stuff inside all my toilets, replaced the washroom taps, changed moen cartridges in the showers, replaced the crapola drum humidifier with a flow through one, replaced the kitchen tap with sprayer all by watching youtube tutorials. Feels good to fix things myself.
|
|
|
Thread Tools |
Search this Thread |
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 03:30 PM.
|
|