Quote:
Originally Posted by surferguy
For the ash legs I did 2 coats of Saman black stain. After that I used the same finish for the whole piece:
1/3 General Arm R Seal
1/3 Boiled Linseed Oil
1/3 Tung Oil
1. Apply liberally and let sit about 20 mins before wiping everything off (doing your best to remove everything).
2. Let sit for 48 hrs
3. Repeat steps 1 and 2 for a total of three coats
|
Why do you mix both tung and linseed oil? I'm a novice woodworker and I thought those two oils did the same basic thing.