Quote:
Originally Posted by cupofjoe
I do agree with many things in your post and the general point you are trying to make but you have errors in the above.
Cat6 can do 10 Gigabit on distances less than 55 metres (180 feet). 6a can do 330 feet. 180 is long enough for most houses.
Cat 7 is expensive and extremely uncommon in residential. It is about $0.65 ft as oppose to Cat 6 ~$0.13 ft, so approximately 500% more. It is thicker and harder to pull, so it would take longer to install.
As a professional, I would recommend either 6 or 6a. If future proofing is the main concern then conduit or perhaps fibre might be a consideration.
I have seen so many basements that are poorly constructed DIY projects. With proper inspection, the finished product would be detrimental to the sale of the home down the road. The persons that took on these projects lacked some combination of skill, patience, knowledge, and / or effort.
The point I am trying to make are good professionals will give proper advice and achieve a good end result. It takes a considerable effort, knowledge, learnt skill etc for DIY to pull off a similar result. It is certainly not impossible to do and I have seen many well-done basements by homeowners, but have seen many mediocre to poor ones as well.
|
Oops, I messed up the difference between 5e and 6/6a. My bad.
As a professional, are there any specific considerations when pulling cable based on the CMP or CMR rating of the cable for fire proofing/liability concerns and whatnot?