Quote:
Originally Posted by photon
Let me know how that Alien works out.
My ASUS router rebooted one too many times today, the last reboot it reset to factory config by itself so figured it was time to setup the AmplifiHD.
Easy enough to setup, there's not a lot of options on the thing. The previous owner hadn't reset it so I had to use the reset switch to get into it. Set it up with the same SSID and password and everything seems to have reconnected automagically which is nice.
Only thing I'm having problems with is setting up port forwarding for Bittorrent.. Tried setting it up, the client reports it's not connected. Trying to connect to the port from Powershell and it works directly to my computer, but not to my Internet IP. Worked fine on my ASUS router.
Tried switching to an assigned IP address on the router and re-setup the port forward, same problem. Have Hardware NAT turned on and UPNP turned off.
Will have to play around with it.. maybe setup a web server and test port 80 or something just to try and figure out where the problem might be.
And will have to either change my network IP range or reset my NAS, the old network was on a 10.x.x.x range and I had my NAS setup with a static IP for some reason so it can't talk to the network currently. Or I wonder if I set my computer IP manually to an IP on the same 10.x.x.x subnet if I could connect to the NAS long enough to set the IP to DHCP and then I could give it an assigned IP.
|
Are you trying to access the options from the web splash page or the AmpliFi app? I seem to recall one had more options than the other, but I haven't looked at it for a few years now that I'm on Unifi. Strange that torrents aren't working.
Could you try quickly factory resetting the whole set up from the UI and see if there was some kind of settings leftover from the reset switch method?
How's the rest of the other devices connecting to the set up? Decently stable? Decent signal strength?