Quote:
Originally Posted by speede5
On the inside look for little plugs on the trim, there should be screws underneath that go through to the front frame. Remove the screws and pop the window out and replace the sealing strips. I have done the larger inserts and the adhesive on the seals is really strong so it's hard not to do a bit of damage to the door finish when you're removing it.
If the only time it leaks is when you are spraying directly on it I would probably leave it. If it leaks everytime it rains that's another story.
|
I think I’ll have to get Lux to look at it then, as I don’t want damage anything.
It leaked through during that last rainstorm too, though that was quite the downfall. Not a *huge* amount, but enough to drip on the floor.