Quote:
Originally Posted by Northendzone
johnny - if those spokes are loose then get the bike back tot eh shop as they need to all be tensioned.
i'd jsut take the rig back given it is relatively new so they can give it another once over. Go before the long weekend as i'd imagine most shops are now getting really busy
|
So I checked all the spokes and they were not lose as far as I could tell (all seems about the same). What I did is put a tiny drop of Teflon oil on each spoke crossing point. Not sure if that cleaned something out or only lubricated it. Not a peep out of the rim now. I will take into bow as soon as I can get there. My ride was a lot less embarrassing and enjoyable after this.