Quote:
Originally Posted by HotHotHeat
Just to end the confusion if there still is any, the modem used for 150 can be bridged, I had my install on Sunday - The installer wasn't sure, but I contacted tech support and they flipped it no problem.
|
Edit:
Found this online
Directly connect an Ethernet cable from the modem to the computer.
Open a web browser and enter the following address to access the gateway login page: 192.168.0.1.
Login with:
Username: cusadmin
Password: password
Once the Basic page has loaded, click the Gateway Function.
Toggle the Residential Gateway function box from Enabled to Disabled.
Click OK and the gateway will restart.
Once the modem is online, plug a device into port one to test their connectivity.
While in bridged mode, only port one will be active on the gateway.
Note: If you want to put the modem back into gateway mode, factory reset the modem by pressing the reset button on the back for more than 10 seconds.
HOWEVER
The shaw version of this modem does not have that feature listed.