Ugh...what a mess...I ended up having to take a few backsplash tiles out(I have spares) because the moran filled the cavity with foam and I couldn't pull out the old wires without making a 1 ft size hole. As expected their were wires all over the place. So no ,i didn't get close to completing the job.
Instead of the 20 amp on the right of the sink, I just ran a 15A GFCI as we rarely use that plug. The other reason was it is a 2 gang box and has the lights on it, but there wouldn't have been room for a 15A and a 20A line into the box. So I just ran a new 15A and hooked the lights to the load line of the GFCI plug.
I also ran a new line for the dishwasher and another for the garbage disposal. Everything except the garbage disposal is hooked up on that side.
The other side is the foam bomb one, so I'm replacing the 2 gang with a 3, running 2 20A GCFI's as it is heavily used and a switch for the light on that side. That light will be powered by a 15 A shared with a few outlets in the living room.
That leaves me with still needing to run a 20A to a plug on another wall that is heavily used, then I can work on the basement lights and get the furnace on it's own breaker. And fix the tiles...Phew, so much for a friday project! This is gonna be a 2 weekender!
|