[return to the red]

PM'S sent. I should mention that We DO NOT do any repairs or installations but am happy to recommend companies.

In regards to startup's simply turn your water on and go to your valves. Turn the valve on manually by giving the solenoid a quarter turn, This will manually turn on the valve or "zone". Check to make sure line fills and heads pop up and with no leaks and are adjusted accordingly and hand tighten solenoid on valve. This should turn the valve off, if it stays open you may have a problem with the diaphragm in the valve and could be as simple as just dirt or debris caught in it. Simply remove the top and inspect the diaphragm for tears and put the valve back together. Proceed to go through all zones repeating these steps.

cheers

rttr

Edit: I should mention that if any members are landscapers or installers themselves and do Irrigation feel free to give your company a shout out in this thread.