Quote:
Originally Posted by Hack&Lube
There are other considerations but going to 3 or 3.2GHz should be easy and you won't need to mess with voltages, ram dividers, and all the advanced things like vdroop, cpu termination, etc. If it's unstable, just give the CPU or chipset a slight voltage boost.
|
IIRC one thing I do is set the PCIe at 100 because as you raise the clock speed the PCIe speed also increases if it's set on auto, which can be a little dangerous. Also on my MB, the ram speed will increase as you raise the clock speed so this may have to be adjusted down as well, so the ram isn't running beyond it's capabilities.