Quote:
Originally Posted by BlackArcher101
No where did I say it was pilot error if you read my post. I was referring to a loss of control caused by computer malfunction, evident by the lack of movement in the rear stabilizers. Any pilot worth his salt (and hopefully you) would move the stick to the left (or pedals) a bit to try to get out of a right roll, however the stabilizers didn't move, so I deductedhis inputs were not being translated to the control surface (ie, computer failure).
|
If you look at the rudders they are in full deflection. Also, prior to the yaw the stabilizers are moving quite a bit, controlling the aoa.