Quote:
Originally Posted by Ducay
Loosen the lug nuts and drive it maybe a foot or so and break. Tada!
You may have to go back and forth and stop a couple times, but itll come loose, always does. Just make sure the lug nuts are just loose, not off or close to.
|
I wish I thought of that before spending an hour doing this:
Quote:
Originally Posted by firebug
I had a stuck alloy rim last fall when I was trying to switch to my winter tires.
If you have a deadblow mallet try tapping on the edge of the rim, and if not, use a normal hammer with a piece of 2x4 to protect the rim.
~firebug
P.S. I now run a bit of grease on the back sides of my rim where they are in contact with the hub to try and prevent this in the future.
|