Quote:
Originally Posted by ken0042
- The one I would recommend is using Dish Pro Plus hardware. It basically allows you to one require one line to each receiver; then a seperator from each line to the two inputs on the 9200 and 9242 receivers. I'm pretty sure there is a diagram on DHC, but for some reason I can't get to their site at the moment; but I'm pretty sure there's a diagram showing how to use the DPP hardware.
Of course, the other option is to activate the 9242 now using the connection for the 9200, let it run the updates, then hook it back up to where the single line runs in. It will only give you single tuner; but at least its an option to start playing with your Xmas toy.
Hope that is of some help.
|
Way ahead of you ... hooked it up to one line and have it in use. Tries to go to a switch check on line 2 if you leave it idle though ... takes over the machine forever.
So the Dish Pro Plus is a splitter at the receiver, avoiding the running of two lines?