Quote:
Originally Posted by Wookie
Okay he's got a JVC IART Pro AV-36P902 TV
http://www.avguide.com/products/product-2064/
It's hooked up to a receiver.
When you change the input on the receiver it's blank. There is sound, but no picture. So playing DVD works, playing Digital cable doesn't, and playing N64 does the same thing.
Now in order to see if it was the receiver, another TV was hooked up and it worked fine.
So, when you change the input on the receiver the TV doesn't seem to get that it's not changing.
Any ideas/suggestions?
Thanks |
was over at my buddies place last night actually and he was having a similar problem but could get picture on the TV but no sound. I don't know if it's similar but we had to change some of the settings on the TV to "activate" the outputs.
Of course I told all of this over the phone and to read his TV instruction manual, he says he does but doesn't figure it out until i'm over there reading the freakin manual with him.
On another note. Anybody have trouble with their Shaw HD PVR boxes?
my PVR stopped working and then I couldn't bring the guide up so 2 days ago I called Shaw and went through a bunch of stuff and it still didn't work so they scheduled a Tech call. Last night the entire box wasn't working (couldn't get any channels) I called Shaw and he reset the box and boom the channels work, still no guide or PVR working. Watching TV for about half an hour and all of a sudden the TV flickers and next thing I know the guide works and the PVR works...what the hell!!?