Quote:
Originally Posted by dubc80
I use my stove.
Turn the burner on high and "hover" your stick above it. The glue will melt and you will be able to pull the blade/butt end out.
I believe the best way is a torch if you have access to one.
If its a senior stick, you may not need the butt end (unless you're tall, I guess). Try to minimize the use of the butt end if possible as it screws around with the flex!!!
|
don't use an open flame unless you absolutely have to...if you do, make sure you don't stop that flame unless you want nice scorch marks or worse on it...if you've got a heat gun or ultra-high-powered blow dryer kicking around, use that. it works amazingly well
as for the flex...for every inch you cut/add to a stick, i believe it adds 3 or 10 flex to the stick...i can't remember which though